LOCTITE® FREKOTE® FMS
Features and Benefits
Available sizes:
Wipe-on, solvent-based composite molds sealer for a high-gloss surface.
Wipe on LOCTITE® FREKOTE® FMS solvent-based sealer in your composite molds preparation phase for a high gloss surface. It is formulated specifically as a sealer for fibreglass reinforced polyester, epoxy and other composite molds. It seals microporosities and provides uniform release agent coating. Allow approximately 15 minute dry time at 20°C (68°F) between coats, and then 20 minutes for final coat.
- High gloss surface
- Wipe-on application
- Sealer for composite molds
Documents and Downloads
Safety Data Sheets and RoHs
- Can 4.0/case - IDH 548976
LOCTITE® FREKOTE® FMS, 1 gal Can 548976 en-CA
IDH:
548976
EAN:
079340384132
Size Case: Can
Quantity: 4.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Applications | Mould preparation |
| Finish reflection | Gloss: high gloss |
| Full cure time, @ 20.0 °C | 20.0 min. |
| Key characteristics | Solvent based |
LOCTITE® FREKOTE® FMS
Wipe-on, solvent-based composite molds sealer for a high-gloss surface.