LOCTITE® FREKOTE® R-150
Known as AQUALINE R-150
Features and Benefits
A 1-part, fast and easy-to-apply water-based mould-release emulsion that releases standard rubbers and rubber-to-metal parts with low slip and low mould build-up.
LOCTITE® FREKOTE® R-150 is a water-based mould-release emulsion that releases standard rubbers and rubber-to-metal parts. It exhibits low slip and low mould build-up and is fast and easy to apply with a spray gun. It is heat-cured: multiple coats are applied to the heated mould, with no drying time needed between coats above 150°C (302°F). Final coat-drying time can be as short as 4 minutes.
- Suitable for all standard rubbers
- Low slip, low mould build-up
- Fast and easy to apply
- For rubber-to-metal parts
- Fast cure time
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Finish reflection | Matt |
| Full cure time, @ 150.0 °C | 4.0 min. |
| Key characteristics | Release: rubber release, Water based |
LOCTITE® FREKOTE® R-150
A 1-part, fast and easy-to-apply water-based mould-release emulsion that releases standard rubbers and rubber-to-metal parts with low slip and low mould build-up.